Electrical -- Testing & Repair -- 203 Chassis

• Testing & Repair
  • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9203AA
  • Initial filling of battery - AR54.10-P-0001Z
  • Disconnect/connect battery's ground cable - AR54.10-P-0003P
  • Disconnect/connect battery's ground cable - AR54.10-P-0003Q
  • Remove/install battery - AR54.10-P-0005P
  • Treatment of battery if vehicle taken out of service - AR54.10-P-0006P
  • Remove/install cigarette lighter - AR54.10-P-0030TX
  • Remove/install 12 Volt socket - AR54.10-P-1000TX
  • Preparing test with quiescent current retention unit - AR54.10-P-1030-01P
  • Preparing test without quiescent current retention unit - AR54.10-P-1030-02P
  • Testing quiescent current - AR54.10-P-1030-03P
  • Determining circuit with excessive quiescent current consumption - AR54.10-P-1030-04P
  • Determining fused components with excessive quiescent current consumption - AR54.10-P-1030-05P
  • Determining unfused components with excessive quiescent current consumption - AR54.10-P-1030-06P
  • Connecting and disconnecting quiescent current retention unit - AR54.10-P-1030-07I
  • Check quiescent current consumption - AR54.10-P-1030P
  • Check battery: Risk of explosion; Risk of poisoning; Risk of injury; Reduce increased voltage after charging process - AR54.10-P-1129-01A
  • Check battery voltage by means of the instrument cluster (IC) - AR54.10-P-1129-02A
  • Reduce increased voltage after charging process Risk of explosion Risk of poisoning and caustic burns Risk of injury - AR54.10-P-1129-03A
  • Check condition of battery - AR54.10-P-1129P
  • Charge battery - AR54.10-P-1130P
  • Check battery condition before vehicle delivery - AR54.10-P-1132A
  • Check charge state of battery - AR54.10-P-1136-01A
  • Remove/install driver's side interior fuse box - AR54.15-P-1310P
  • Install headliner wiring harness - AR54.18-P-0020P
  • Removing and installing rear axle headlamp range adjustment sensor wiring harness - AR54.18-P-0040P
  • Install wiring harness - AR54.18-P-0056P
  • Removing and installing air conditioning wiring harness - AR54.18-P-0070P
  • Removing and installing air conditioning wiring harness - AR54.18-P-0070PA
  • Disconnecting residual engine heat utilization system wiring harness - AR54.18-P-0080-01P
  • Remove/install wiring harness of headlamp cleaning system - AR54.18-P-0090P
  • Checking wiring harness - AR54.18-P-0600-01A
  • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
  • Disconnect cables from control units and fuse and relay boxes - AR54.18-P-1261-01P
  • Disconnect cables at control module, fuse and relay box - AR54.18-P-1261-01PA
  • Connecting cables to control units and fuse and relay boxes - AR54.18-P-1261-02P
  • Remove/install module housing - AR54.20-P-2360P
  • Programming the control module - AR54.21-P-0012-04P
  • Flashing control unit - AR54.21-P-0012-06A
  • SCN coding with SDflash Online - AR54.21-P-0013-02X
  • SCN coding with SDflash Office - AR54.21-P-0013-03X
  • Offline SCN coding - AR54.21-P-0013-04X
  • Program control unit - AR54.21-P-0014-01Y
  • Program control unit - AR54.21-P-0014-01Z
  • Programming of control units - AR54.21-P-0014Y
  • Programming of control units - AR54.21-P-0014Z
  • SCN coding of control units - AR54.21-P-0015X
  • Central gateway control unit (ZGW), remove and install - AR54.21-P-0817P
  • Remove/install SAM control unit with fuse and relay box in rear - AR54.21-P-1259P
  • Remove/install SAM control unit with fuse and relay box in rear - AR54.21-P-1259PC
  • Remove/install SAM control unit with fuse and relay box in rear - AR54.21-P-1259PS
  • Remove/install SAM with fuse and relay box, left front - AR54.21-P-1260P
  • Remove/install overhead control panel control unit - AR54.21-P-1262P
  • Remove/install upper control panel control unit - AR54.21-P-1262PA
  • Remove/install combination switch - AR54.25-P-2800P
  • Removing and installing combination switch - AR54.25-P-2800PQ
  • Remove/install steering column module - AR54.25-P-2802PQ
  • Remove/install cruise control switch - AR54.25-P-2803P
  • Remove/install cruise control switch - AR54.25-P-2803PQ
  • Remove/install steering column adjustment switch - AR54.25-P-2804P
  • Remove/install steering column adjustment switch - AR54.25-P-2804PQ
  • Remove/install light switch module - AR54.25-P-3270P
  • Pull out instrument cluster - AR54.30-P-6015-01P
  • Remove/install instrument cluster - AR54.30-P-6015P
  • Removing and installing instrument cluster housing - AR54.30-P-6031P
  • Remove/install outside temperature indicator sensor - AR54.30-P-6341P
  • Remove, install fanfare horns - AR54.35-P-1555P
  • Removing and installing Parktronic system (PTS) sensors in front bumper - AR54.65-P-0001P
  • Removing and installing Parktronic system (PTS) sensors in rear bumper - AR54.65-P-0002P
  • Remove, install warning display in instrument panel for Parktronic system (PTS) - AR54.65-P-0003P
  • Remove/install Parktronic system (PTS) warning indicator in rear dome lamp - AR54.65-P-0004P
  • Remove/install Parktronic system (PTS) switch - AR54.65-P-0005P
  • Remove/install Parktronic system (PTS) control unit - AR54.65-P-0006P