LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> C240 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electrical -- Testing & Repair -- 203 Chassis >> Testing & Repair >> Remove/install SAM control unit with fuse and relay box in rear - AR54.21-P-1259PC

Remove/install SAM control unit with fuse and relay box in rear - AR54.21-P-1259PC

MODEL 203.7 

Fig 1: Identifying SAM Control Unit Remove/Install Components With Fuse And Relay Box In Rear - MODEL 203.7
G04733854
MODIFICATION NOTES

12.4.05 Stage basic data in STAR DIAGNOSIS, added and disconnect battery ground line, taken away Steps 1 to 11  
REMOVINGINSTALLING Remove/Install     
1.1 Connect STAR DIAGNOSIS and stage basic data from rear SAM control unit with fuse and relay module (N10/2) in STAR DIAGNOSIS Only when installing new the rear SAM control unit with fuse and relay module (N10/2).
IMPORTANTInstallation:  Transfer staged basic data to new rear SAM control unit with fuse and relay module (N10/2).
 
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory   AD00.00-P-2000-04A
    STAR DIAGNOSIS diagnosis system *WH58.30-Z-1048-13A 
2 Unlock and remove left stowage compartment    
3 Remove bolts (1)    
4 Remove first aid kit bracket (2)    
5 Unscrew bolt (3).    
6 Pry off and move bracket (4) from rear SAM control unit with fuse and relay module (N10/2) IMPORTANT Move bracket (4) until rear SAM control unit with fuse and relay module (N10/2) is freely accessible.  
7 Unlock and remove rear SAM control unit with fuse and relay module (N10/2) NOTES Carefully tilt rear SAM control unit with fuse and relay module (N10/2) through 90 ° towards the spare wheel well otherwise the retaining lugs (arrows) may be damaged.  
8 Release and disconnect electrical connectors (5). IMPORTANT The electrical connector (5) leading circuit 30 must be disconnected first and contacted last. Unlock and separate electrical connectors (5), see: ↓  
    Disconnecting cables from control units and fuse and relay boxes AR54.18-P-1261-01P 
    IMPORTANTInstallation:  Lock and contact electrical connectors (5), see: ↓  
    Connecting cables to control units and fuse and relay boxes AR54.18-P-1261-02P 
9 Remove rear SAM control unit with fuse and relay module (N10/2)    
10.1 Check fuse and relay assignment at rear SAM control unit with fuse and relay module (N10/2) Only when installing new the rear SAM control unit with fuse and relay module (N10/2).  
REFER TO BASIC KNOWLEDGE Fuse assignment of fuse and relay box in trunk   GF54.15-P-1256-01P
REFER TO BASIC KNOWLEDGE Relay assignment of fuse and relay box in trunk   GF54.15-P-1257-01P
11 Install in the reverse order    
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnosis system, Compact Passenger Car 6511 1801 00