Removing and installing window lift mechanism in front door - AR72.10-P-1800GH

MODEL 163

Fig 1: Identifying Window Lift Mechanism In Front Door

G04608336

	Removing
1	Remove crank window from front door		AR72.10-P-1900GH
2	Remove side airbag in front door		AR91.60-P-0690GH
3	Remove power window motor in front door		AR72.29-P-1860GH
4	Drill out pop rivets (arrows, 10 each)	Drive out rivet residues with suitable punch Do not damage inner door panel. Remove rivet residues and drilling chips from door, corrosion hazard.
5	Remove power window (1) out of inner door panel and remove through installation opening toward bottom.
	Installing
6	Insert window lift mechanism (1) through installation opening from below and hook into inner door panel from inside
7	Rivet window lift mechanism (1) with pop rivets (arrows).		*WH58.30-Z-1001-29A
8	Grease guide rail with multi-purpose paste		*BR00.45-Z-1009-06A
9	Install power window motor in front door		AR72.29-P-1860GH
10	Install side airbag in front door		AR91.60-P-0690GH
11	Install crank window in front door		AR72.10-P-1900GH
12	Adjust front door crank window		AR72.10-P-1950GH

Commercially available tools

Number	Designation
WH58.30-Z-1001-29A	Lever riveting device

Repair materials

Number	Designation	Order number
BR00.45-Z-1009-06A	Multi-purpose paste	A 000 989 80 51 10