Cranking engine with starter - AR01.10-P-0110A

ENGINE 111 in MODEL 124, 163, 170, 202, 208, 210 

Fig 1: Cranking Engine With Starter - Engine 111 In Model 124, 163, 170, 202, 208, 210

	Removal, installation
	Risk of accident  caused by car starting off when engine running. Risk of injury  from contusions and burns if hand inserted during starting off when engine running.	Secure vehicle to prevent it moving off. Wear closed and close-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
1	Switch off ignition	Key in steering lock in position 0.
2	Connect compression tester (01)		Figure
		Model 124	AR01.10-P-0010-01HA
		Model 163 with engine 111	AR01.10-P-0010-01V
		Model 170	AR01.10-P-0010-01C
		Model 202 with engine 111	AR01.10-P-0010-01A
		Model 208 with engine 111	AR01.10-P-0010-01E
		Model 210 with engine 111	AR01.10-P-0010-01BG
3	Crank engine	Press contact switch of compression pressure recorder for this purpose. Do not crank engine at steering lock.
4	Install in the reverse order

Fig 2: Identifying Electrical Connection Set (201 589 00 99 00)

Fig 3: Identifying Compression Tester (001 589 76 21 00)

Fig 4: Identifying Adapter Cable (124 589 36 63 00)

Fig 5: Identifying Adapter Cable (170 589 02 63 00)