Connect compression tester Information on preventing damage to electronic components due to electrostatic discharge - AR01.10-P-0010-01V

Fig 1: Identifying Compression Recorder (001 589 76 21 00)

Fig 2: Identifying Electrical Connection Set (201 589 00 99 00)

1. Remove cover on fuse and relay module.
2. Clip connection terminal (A) of compression tester onto circuit 30, 15, 61 terminal block (3-pin) (X12/3).
3. Pull starter relay (2) out of the fuse module (relay place 8).
4. Connect adapter line (1)with terminal 87 in relay place 8 of the fuse module.
5. Connect adapter line (1) to the cable of the compression tester.

Fig 3: Removing Starter Relay Out Of Fuse Module