Connecting compression tester - AR01.10-P-0010-01HA

Fig 1: Identifying Electrical Connection Set (201 589 00 99 00)

Fig 2: Identifying Compression Tester (001 589 76 21 00)

Fig 3: Identifying Adapter Cable (124 589 36 63 00)

1. Connect clamp of the compression tester (A) to the positive cable of the battery.
   Fig 4: Identifying Compression Tester Clamp And Battery Positive Cable

   
2. Unplug connector of the starter wiring harness plug connection (X27).
3. Plug in adapter cable (05) at the plug connection (X27).
4. Connect adapter cable (05) with cable (06) of the compression tester.
   Fig 5: Identifying Starter Wiring Harness Plug Connection And Adapter Cable