Checking pneumatic headlamp range adjustment - AR82.10-P-4011EA
MODEL 170, 202, 210
except CODE (491) US version except CODE (612b) Xenon headlamps
| Checking | |||
| Checking pneumatic headlamp range adjustment | GF82.10-P-0001AA | ||
| 1 | Check headlamp adjustment, correct | AP82.10-P-8260A | |
| 2 | Move headlamp range control from position 0 to position 3 | Cut-off should move from A to B If cut-off does not move: ↓ | |
| Check vacuum system for headlamp range adjustment | AR82.10-P-4011-01EA | ||
| 3 | Adjust knurled knob or test screen on headlamp adjuster until cut-off (B) is reached | If the specified value on the adjustment scale on the headlamp adjuster is not reached: ↓ | *BE82.10-P-1003-01A |
| Check reflector for easy motion and actuator stroke (model 202 up to 31.08.96) | AR82.10-P-4011-02ZA | ||
| Check reflector for easy motion (models 170, 202 as of 01.09.96, 210) | AR82.10-P-4012-01A | ||
| Check actuator stroke (model 170, 202 as of 01.09.96, 210) | AR82.10-P-4012-02A | ||
| Check vacuum system for headlamp range adjustment | AR82.10-P-4011-01EA |
TEST AND ADJUSTMENT DATA EXTERIOR LIGHTS
| Number | Designation | Model 170 except |
Model 202 except |
||
|---|---|---|---|---|---|
| BE82.10-P-1001-01A | Vacuum levels of pneumatic headlamp range adjustment | Position 0 | mbar | 400 ± 30 | 400 ± 30 |
| Position 1 | mbar | 290 ± 30 | 290 ± 30 | ||
| Position 2 | mbar | 200 ± 30 | 200 ± 30 | ||
| Position 3 | mbar | 50 ± 30 | 50 ± 30 | ||
| BE82.10-P-1002-01A | Travel of positioning element of pneumatic headlamp range adjustment | Position 0 | mm | 0.0 | 0.0 |
| Position 1 | mm | 0.95 | 0.95 | ||
| Position 2 | mm | 1.7 | 1.7 | ||
| Position 3 | mm | 3.0 | 3.0 | ||
| BE82.10-P-1003-01A | Specified value for displacement of cut-off on setting scale of headlamp beam adjuster | cm | 33-48 | 33-48 | |
TEST AND ADJUSTMENT DATA EXTERIOR LIGHTS
| Number | Designation | Model 210 except |
||
|---|---|---|---|---|
| BE82.10-P-1001-01A | Vacuum levels of pneumatic headlamp range adjustment | Position 0 | mbar | 400 ± 30 |
| Position 1 | mbar | 290 ± 30 | ||
| Position 2 | mbar | 200 ± 30 | ||
| Position 3 | mbar | 50 ± 30 | ||
| BE82.10-P-1002-01A | Travel of positioning element of pneumatic headlamp range adjustment | Position 0 | mm | 0.0 |
| Position 1 | mm | 0.95 | ||
| Position 2 | mm | 1.7 | ||
| Position 3 | mm | 3.0 | ||
| BE82.10-P-1003-01A | Specified value for displacement of cut-off on setting scale of headlamp beam adjuster | cm | 33-48 | |