Roll Bar Crash Deployment Trouble Shooting (Section 19.2/13.1)

ROLL BAR CRASH DEPLOYMENT TROUBLE SHOOTING

Problem
⁽¹⁾

Possible Causes

Test Step/Remedy

Warning Lamp (A1e29) In Instrument Panel Does Not Turn Of After Engine Has Been Started, Or Remains On While Driving.

⁽²⁾ Locate Malfunction By Reading Out Memory Codes

⁽³⁾ Review Functional Description

⁽¹⁾	Observe preparations for testing. See ROLL BAR - PREPARATION FOR TESTING (UP TO 8/95) under CONNECTING ELECTRICAL TEST EQUIPMENT under ELECTRICAL DIAGNOSTIC TESTS.

⁽²⁾	Check for fault codes. See ROLL BAR CRASH DEPLOYMENT DIAGNOSTIC TROUBLE CODE DEFINITIONS (UP TO 8/95) table under READING & CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM (SECTION 12).

⁽³⁾	Review functional description. See ROLL BAR CRASH DEPLOYMENT.