LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Seat Belt) >> Rear Seat Belt Removal/Installation >> Hatchback (5HB)

Hatchback (5HB)

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat belt from the guide.
    Fig 1: Remove Rear Seat Belt From Guide
    G11539421Courtesy of MAZDA MOTORS CORP.
  2. Remove the following parts:
    1. Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
    2. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
    3. Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION .)
    4. Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION .)
    5. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Set the tire house trim aside. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
  4. Remove the trunk side upper trim. (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION .)
  5. Remove the bolts.
    Fig 2: Removing Rear Seat Belt
    G11539424Courtesy of MAZDA MOTORS CORP.
  6. Remove the rear seat belt in the direction of the arrow.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals