LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Engine Cooling System (2GR-FXS) - Service Information) >> COOLANT (for Engine) >> Replacement [12/2023 - ] >> Procedure

Replacement [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH 

    Refer to PROCEDURE - Step 7

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 

    Refer to PROCEDURE - Step 8

  3. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 9

  4. REMOVE REAR ENGINE UNDER COVER RH 

    Refer to PROCEDURE - Step 11

  5. REMOVE SUSPENSION TOWER DAMPER 

    Refer to PROCEDURE - Step 4

  6. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 6

  7. ADD ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 7

  8. INSPECT FOR COOLANT LEAK (for Engine) 

    Refer to PROCEDURE - Step 1

  9. INSTALL SUSPENSION TOWER DAMPER 

    Refer to PROCEDURE - Step 1

  10. INSTALL REAR ENGINE UNDER COVER RH 

    Refer to PROCEDURE - Step 80

  11. INSTALL NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 81

  12. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH 
  13. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH 
scientia non olet · About LEMON Manuals