Removal [09/2014 - ]: Procedure

REMOVE FRONT DOOR SCUFF PLATE LH (for Side)
Refer to PROCEDURE - Step 3 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 3 [11/2017 - ]
REMOVE FRONT DOOR OPENING TRIM COVER LH (for Side)
Refer to PROCEDURE - Step 4 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 4 [11/2017 - ]
REMOVE FRONT PILLAR GARNISH LH (for Side)
Refer to PROCEDURE - Step 5 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 5 [11/2017 - ]
REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)
Refer to PROCEDURE - Step 33 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 33 [11/2017 - 03/2019] , or refer to PROCEDURE - Step 33 [03/2019 - 09/2020] , or refer to PROCEDURE - Step 33 [09/2020 - 01/2023] , or refer to PROCEDURE - Step 32 [01/2023 - ]

REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for Side)

Remove the 2 screws.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Lift the front No. 2 speaker assembly and disconnect the connector to remove it.
NOTE:
Do not touch the speaker cone.

REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Center)
Refer to PROCEDURE - Step 35 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 35 [11/2017 - 03/2019] , or refer to PROCEDURE - Step 35 [03/2019 - 09/2020] , or refer to PROCEDURE - Step 35 [09/2020 - 01/2023] , or refer to PROCEDURE - Step 34 [01/2023 - ]

REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for Center)

Remove the 2 screws.

Lift the front No. 3 speaker assembly and disconnect the connector to remove it.
NOTE:
Do not touch the speaker cone.