LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> ES 300h >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Service Information) >> Navigation Receiver >> Removal [07/2015 - ] >> Procedure

Removal [07/2015 - ]: Procedure

  1. PRECAUTION 

    Refer to PRECAUTION [07/2015 - 08/2016] Refer to PRECAUTION [08/2016 - ]

    NOTE:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work. Refer to PRECAUTION [07/2015 - ]

  2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column) 

    Refer to PROCEDURE - Step 1

  3. REMOVE LUGGAGE TRIM SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 2

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [07/2015 - ]

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5

  6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 12

  7. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 13

  8. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 14

  9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 9

  10. REMOVE NO. 1 RADIO BRACKET 
    1. Remove the 4 screws and No. 1 radio bracket.
      GTY498636Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE NO. 2 RADIO BRACKET 
    1. Remove the 4 screws and No. 2 radio bracket.
      GTY517744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE RADIO RECEIVER ASSEMBLY 
scientia non olet · About LEMON Manuals