Instrument Panel Safety Pad: Reassembly

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL ENGINE SWITCH 
   1. Install the engine switch.

      for 2GR-FE (See INSTALLATION )

      for 1UR-FSE (See INSTALLATION )

2. INSTALL FRONT STEREO COMPONENT SPEAKER  (See INSTALLATION )
3. INSTALL FRONT NO. 2 SPEAKER LH  (See INSTALLATION )
4. INSTALL FRONT NO. 2 SPEAKER RH  (See INSTALLATION )
5. INSTALL NO. 1 SPEAKER HOLE COVER 
   1. Attach the 4 clips to install the speaker panel.
      Fig 1: Identifying Speaker Panel Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY 
   1. Attach the 2 claws and 2 clips to install the speaker panel.
      Fig 2: Identifying Instrument Panel No. 1 Speaker Panel Sub-Assembly Claws And Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY 
   1. Attach the 2 claws and 2 clips to install the speaker panel.
8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY 
   Fig 3: Identifying Instrument Panel No. 2 Speaker Panel Sub-Assembly Claws And Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY 
   1. Attach the 6 claws to install the register.
      Fig 4: Identifying Instrument Panel No. 1 Register Assembly Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
10. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY 
    1. Attach the 8 claws to install the register.
       Fig 5: Attaching Claws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY 
    1. Attach the 6 clips and 4 claws to install the register.
       Fig 6: Identifying Instrument Panel No. 2 Register Assembly Clips And Claws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
12. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the duct with the 4 screws.
       Fig 7: Locating No. 2 Heater To Register Duct Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
13. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
       Fig 8: Identifying No. 1 Heater To Register Duct Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
14. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
       Fig 9: Identifying No. 3 Heater To Register Duct With Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
15. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the duct with the 3 screws.
       Fig 10: Identifying Defroster Nozzle Assembly Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
16. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT 
    1. Install the duct with the screw.
       Fig 11: Identifying No. 2 Defroster Nozzle Duct Screw

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
17. INSTALL SIDE DEFROSTER NOZZLE DUCT NO. 1 
    1. Install the duct with the screw.