REAR POWER SEAT MOTOR ASSEMBLY (for Power Seat): Installation

HINT:

• A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY RH (See  REASSEMBLY  ) 
2. INSTALL REAR SEAT INNER BELT ASSEMBLY CENTER  (See INSTALLATION )
3. INSTALL REAR SEAT WIRE RH 
4. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER RH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
5. INSTALL SEATBACK COVER WITH PAD RH (See  REASSEMBLY  ) 
6. INSTALL SEAT CLIMATE CONTROL ECU RH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
7. INSTALL POSITION CONTROL ECU RH (See  REASSEMBLY  ) 
8. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY RH (See  REASSEMBLY  ) 
9. INSTALL REAR SEAT HEADREST SUPPORT RH (See  REASSEMBLY  ) 
10. INSTALL REAR SEAT HEADREST ASSEMBLY RH (See  REASSEMBLY  ) 
11. INSTALL REAR SEAT SHOULDER BELT GUIDE ASSEMBLY RH (See  REASSEMBLY  ) 
12. INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY LH (See  REASSEMBLY  ) 
13. INSTALL REAR SEAT WIRE LH 
14. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
15. INSTALL SEATBACK COVER WITH PAD LH (See  REASSEMBLY  ) 
16. INSTALL SEAT CLIMATE CONTROL ECU LH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
17. INSTALL POSITION CONTROL ECU LH (See  REASSEMBLY  ) 
18. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
19. INSTALL REAR SEAT HEADREST SUPPORT LH (See  REASSEMBLY  ) 
20. INSTALL REAR SEAT HEADREST ASSEMBLY LH (See  REASSEMBLY  ) 
21. INSTALL REAR SEAT SHOULDER BELT GUIDE ASSEMBLY LH (See  REASSEMBLY  ) 
22. INSTALL REAR NO. 1 SEAT ADJUSTER ASSEMBLY (See  INSTALLATION  ) 
23. INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY (See  INSTALLATION  ) 
24. INSTALL REAR SEATBACK ASSEMBLY RH (See  INSTALLATION  ) 
25. INSTALL REAR SEATBACK ASSEMBLY LH (See  INSTALLATION  ) 
26. INSTALL REAR SEAT CUSHION ASSEMBLY RH (See  INSTALLATION  ) 
27. INSTALL REAR SEAT CUSHION ASSEMBLY LH (See  INSTALLATION  ) 
28. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
29. INSTALL COWL TOP VENTILATOR LOUVER  (See INSTALLATION )
30. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
31. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
32. INSPECT REAR SEAT ASSEMBLY 
    1. Check the power seat operation (see OPERATION CHECK ).
    2. w/ Climate Control Seat System:

       Check the climate control seat system (see OPERATION CHECK ).