REAR SEAT INNER BELT ASSEMBLY (for Power Seat): Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL REAR SEAT INNER BELT ASSEMBLY CENTER 
   1. Install the belt with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
      Fig 1: Locating Rear Seat Inner Belt Assembly Center Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL REAR SEAT INNER BELT ASSEMBLY LH 
   1. Install the belt with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      Fig 2: Locating Rear Seat Inner Belt Assembly Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL REAR SEAT INNER BELT ASSEMBLY RH 
   1. Use the same procedures described for the LH side.
4. INSTALL REAR SEAT ASSEMBLY 
   1. Install the rear seat (see INSTALLATION ).