REAR POWER SEAT MOTOR ASSEMBLY (for Ottoman): Installation

HINT:

• A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY RH (See  REASSEMBLY  ) 
2. INSTALL REAR SEAT WIRE RH 
3. INSTALL SEAT VIBRATOR ASSEMBLY (See  REASSEMBLY  ) 
4. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER SUB-ASSEMBLY RH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
5. INSTALL REAR SEATBACK MAT RH (See  REASSEMBLY  ) 
6. INSTALL SEATBACK COVER WITH PAD RH (See  REASSEMBLY  ) 
7. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY RH (See  REASSEMBLY  ) 
8. INSTALL SEAT CLIMATE CONTROL ECU RH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
9. INSTALL POSITION CONTROL ECU RH (See  REASSEMBLY  ) 
10. INSTALL REAR SEAT HEADREST SUPPORT RH (See  REASSEMBLY  ) 
11. INSTALL REAR SEAT HEADREST ASSEMBLY RH (See  REASSEMBLY  ) 
12. INSTALL REAR SEAT SHOULDER BELT GUIDE ASSEMBLY RH (See  REASSEMBLY  ) 
13. INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY LH (See  REASSEMBLY  ) 
14. INSTALL REAR SEAT WIRE LH 
15. INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER SUB-ASSEMBLY LH (w/ Climate Control Seat System) (See  INSTALLATION  ) 
16. INSTALL SEATBACK COVER WITH PAD LH (See  REASSEMBLY  ) 
17. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
18. INSTALL SEAT CLIMATE CONTROL ECU LH (w/ Climate Control Seat System) (See  REASSEMBLY  ) 
19. INSTALL POSITION CONTROL ECU LH (See  REASSEMBLY  ) 
20. INSTALL REAR SEAT HEADREST SUPPORT LH (See  REASSEMBLY  ) 
21. INSTALL REAR SEAT HEADREST ASSEMBLY LH (See  REASSEMBLY  ) 
22. INSTALL REAR SEAT SHOULDER BELT GUIDE ASSEMBLY LH (See  REASSEMBLY  ) 
23. INSTALL REAR SEATBACK ADJUSTER ASSEMBLY RH 
    1. Install the seatback adjuster with the 4 nuts.

       Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

    2. Connect the 2 connectors.
    Fig 1: Identifying Seatback Adjuster Nuts
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
24. INSTALL REAR NO. 1 SEAT ADJUSTER ASSEMBLY 
    1. Install the seat adjuster with the 4 bolts and nut.

       Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

       Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) for bolt A 

       NOTE: Be careful not to damage the vehicle body.
    2. w/ Climate Control Seat System:

       Connect the air duct to the vehicle body.

       Fig 2: Identifying Rear No. 1 Seat Adjuster Bolts And Nut

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
25. INSTALL REAR SEAT CUSHION AIRBAG ASSEMBLY RH (See  INSTALLATION  ) 
26. INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY 
    1. Install the seat adjuster with the 4 bolts and nut.

       Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

       Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) for bolt A 

       NOTE: Be careful not to damage the vehicle body.
    2. w/ Climate Control Seat System:

       Connect the air duct to the vehicle body.

       Fig 3: Identifying Rear No. 2 Seat Adjuster Bolts And Nut

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
27. INSTALL REAR SEATBACK ASSEMBLY RH (See  INSTALLATION  ) 
28. INSTALL REAR SEAT CONSOLE BOX  (See INSTALLATION )
29. INSTALL REAR SEATBACK ASSEMBLY LH 
30. INSTALL REAR SEAT CUSHION ASSEMBLY RH (See  INSTALLATION  ) 
31. INSTALL REAR SEAT CUSHION ASSEMBLY LH (See  INSTALLATION  ) 
32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
33. INSTALL COWL TOP VENTILATOR LOUVER  (See INSTALLATION )
34. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
35. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
36. INSPECT REAR SEAT ASSEMBLY 
    1. Check the power seat operation (see OPERATION CHECK ).
    2. w/ Climate Control Seat System:

       Check the climate control seat system, (see OPERATION CHECK ).