REAR CONSOLE BOX (for Ottoman): Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

Fig 1: Identifying Rear Seat Console Box Clips

INSTALL REAR SEAT CONSOLE ARMREST ASSEMBLY
1. Connect the connector.
2. Install the console armrest with the 2 screws.
3. Install the 8 nuts and 2 bolts.
  
  Fig 2: Locating Rear Seat Console Armrest Connector, Nuts, Bolts And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the console armrest cover.
  
  Fig 3: Installing Console Armrest Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VOLTAGE INVERTER ASSEMBLY (See REMOVAL )
INSTALL REAR SEAT CONSOLE TABLE ASSEMBLY
1. Install the console table with the 2 nuts and 2 bolts.
  
  Fig 4: Identifying Rear Seat Console Table Nuts And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CONSOLE TABLE COVER FRONT
1. Push down the table cover and attach the 2 hooks.
2. Attach the 2 claws to install the table cover.
  
  Fig 5: Identifying Rear Seat Console Table Cover Hooks And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CONSOLE PANEL ASSEMBLY
1. Connect the connector.
2. Attach the 6 clips to install the console panel.
  
  Fig 6: Identifying Rear Seat Console Panel Assembly Clips And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CONSOLE ARMREST GARNISH RH
1. While lowering the armrest garnish, attach the 3 claws and 2 clips to install it.
  
  Fig 7: Locating Rear Seat Console Armrest Garnish Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CONSOLE ARMREST GARNISH LH
HINT:

Use the same procedures described for the RH side.
INSTALL REAR SEAT CONSOLE BOX ASSEMBLY
1. Connect the connector.
  
  Fig 8: Locating Rear Seat Console Armrest Garnish Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Move the console box in the direction of the arrow shown in the illustration, and attach the 2 clips. Then install the console box with the 6 bolts.
  
  Fig 9: Moving Console Box
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Attach the 2 hooks and install the rear seat console box lower cover to the console box.
4. Attach the 4 claws.
  
  Fig 10: Identifying Rear Seat Console Box Hooks And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Attach the 4 clips to install the rear seat console box front panel.
  
  Fig 11: Identifying Rear Seat Console Box Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002