Engine Cooling - INGENIUM I6 3.0L Petrol -- Range Rover Sport/L494

• Engine Cooling - INGENIUM I6 3.0L Petrol
  • Specifications
    • Torque Specification
  • Description And Operation
    • Engine Cooling - INGENIUM I6 3.0L Petrol (G2299995)
      • Component Location
        • Component Location - 1 Of 2
        • Component Location - 2 Of 2
      • Overview
      • Description
        • Variable Coolant Pump
        • Electric Thermostat With Heater Element
        • Radiator
        • Electric Cooling Fan
        • Coolant Expansion Tank
        • Viscous Cooling Fan
        • Oil Cooler
        • Charge Air Coolant Pump
        • Engine Coolant Temperature Sensor - Cylinder Block Outlet
        • Auxiliary Radiator
        • Auxiliary Coolant Pump
        • Radiator Outlet Temperature Sensor
        • Active Grille Air Shutter
        • Engine Coolant
      • Operation
        • Engine Coolant Circuit Flow
        • Electric Thermostat With Heater Element
        • Engine Coolant Level Sensor
        • Electric Cooling Fan
        • Engine Coolant Expansion Tank
        • Active Grille Air Shutter
        • Diagnostics
      • Control Diagram
        • Control Diagram - 1 Of 1
  • Diagnosis And Testing
    • Engine Cooling - INGENIUM I6 3.0L Petrol (G2297094)
      • Principles Of Operation
      • Inspection And Verification
      • Symptom Chart
      • Variable Coolant Pump Pinpoint Tests
        • Pinpoint Test A: Variable Coolant Pump Diagnostics
        • Pinpoint Test B: Pcm Diagnostic Trouble Code Repair Actions P023A Open Load
        • Pinpoint Test C: Pcm Diagnostic Trouble Code Repair Actions P023B Pulse Width Modulated Short To Ground
        • Pinpoint Test D: Pcm Diagnostic Trouble Code Repair Actions P023C Pulse Width Modulated Short To Power
        • Pinpoint Test E: Pcm Diagnostic Trouble Code Repair Actions P2BC2 Voltage High/Low
        • Pinpoint Test F: Pcm Diagnostic Trouble Code Repair Actions P2B83 Dry Running
        • Pinpoint Test G: Pcm Diagnostic Trouble Code Repair Actions P026E Pump Over-Temperature
        • Pinpoint Test H: Pcm Diagnostic Trouble Code Repair Actions P2B84 Pump Stall
      • Diagnostic Trouble Code Index
  • General Procedures
    • Cooling System Partial Draining And Vacuum Filling (G2319314)
      • Notes
      • Special Tool(S)
      • Draining
      • Filling
    • Cooling System Draining And Vacuum Filling (G2319315)
      • Notes
      • Special Tool(S)
      • Draining
      • Filling
    • In-Line Cooling System Pressure Test (G2923493)
      • Special Tool(S)
        • Notes
        • General Equipment
      • Activation
  • Removal And Installation
    • Auxiliary Radiator (G2325512)
      • Notes
      • Removal
      • Installation
    • Block Heater (G2300629)
      • Notes
      • Special Tool(S)
      • Removal
      • Installation
    • Coolant Expansion Tank (G2300888)
      • Notes
      • Removal
      • Installation
    • Viscous Cooling Fan Shroud (G2413289)
      • Notes
      • Removal
      • Installation
    • Viscous Cooling Fan (G2413290)
      • Notes
      • Special Tool(S)
      • Removal
      • Installation
    • Radiator (G2300891)
      • Notes
      • Removal
      • Installation
    • Cooling Module (G2300892)
      • Notes
      • Part(S)
      • Removal
      • Installation
    • Coolant Pump (G2300894)
      • Notes
      • Part(S)
      • Removal
      • Installation
    • Coolant Pump - Charge Air Cooler (G2300895)
      • Notes
      • Removal
      • Installation
    • Front Electric Cooling Fan (G2320984)
      • Notes
      • Removal
      • Installation
    • Thermostat Housing (G2323060)
      • Notes
      • Part(S)
      • Removal
      • Installation