LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> 2.0L Exhaust System >> Converter, Catalytic >> Removal

Converter, Catalytic: Removal

  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL .
  2. Remove the pressurized coolant bottle. Refer to BOTTLE, PRESSURIZED COOLANT, REMOVAL .
  3. Remove the upstream and downstream oxygen sensor. Refer to SENSOR, OXYGEN, REMOVAL .
    GC0186595Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolts (1) and the catalytic converter heat shield (2).
  5. Remove the EGR tube. Refer to TUBE, EXHAUST GAS RECIRCULATION (EGR), REMOVAL .
    GC0187193Courtesy of CHRYSLER GROUP, LLC
  6. Remove and discard the bolts (1) and the nuts (3) securing the catalytic converter (2) to the turbocharger.
  7. Remove the cross under pipe. Refer to PIPE, EXHAUST CROSSUNDER, REMOVAL .
    GC0187017Courtesy of CHRYSLER GROUP, LLC
  8. Remove the six bolts (1) and the catalytic converter support bracket (2).
  9. Remove the catalytic converter (2) from the bottom of the vehicle.
    GC0186768Courtesy of CHRYSLER GROUP, LLC
  10. Remove and discard the gasket (1).
scientia non olet · About LEMON Manuals