Symptom Chart
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| SYMPTOM |
POSSIBLE CAUSES |
ACTION |
- Head up display image shows a secondary image - HUD image does not look sharp
|
- Protective film still covering HUD lens
- Incorrect seat and HUD display position
- Windshield damage in HUD projection area
- HUD windshield has not been tested by the glass manufacturer
- Non HUD Windshield installed in the vehicle
|
- Check and remove the protective film from the HUD lens as required
- GO to Pinpoint Test A . HUD Image distorted - Seating position
- GO to Pinpoint Test A . HUD Image distorted - Windshield check
- GO to Pinpoint Test A . HUD Image distorted - Test Result Check
- GO to Pinpoint Test A . HUD Image distorted - Logo and trademark check
|
- Head up display projected image brightness does not adjust
|
- Windshield covered in dirt/dust
- Incorrect rain/light sensor installed
|
- Clean the Windshield
- GO to Pinpoint Test B . HUD Brightness - Rain/Light Sensor Check
|
- Head up display does not project image
|
- Item covering HUD projector unit
- Head up display internal failure
|
- Remove any items covering the projector unit
- GO to Pinpoint Test C . HUD - Inoperative
|
| Head up display navigation display not operational |
- CCF or system settings require adjustment
- Head up display internal failure
|
|
- Head up display traffic sign recognition display not operational
|
- CCF or system settings require adjustment
- Head up display internal failure
|
|