LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Information & Message Center -- XE (X760)) >> Information And Message Center >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test E: HUD Traffic Sign Recognition (TSR) Display Checks

Pinpoint Test E: HUD Traffic Sign Recognition (TSR) Display Checks

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. E1: CHECK IF A TRAFFIC SIGN RECOGNITION (TSR) SYSTEM IS FITTED TO THE VEHICLE 
    1. Confirm if the vehicle is fitted with a manufacturer-approved traffic sign recognition system

    Is the vehicle fitted with a manufacturer-approved traffic sign recognition system?

    • Yes  : GO to E2.
    • No  : HUD traffic sign recognition display will not operate
  2. E2: CHECK THE HUD MENU (VIA THE INSTRUMENT CLUSTER) FOR HUD NAV DISPLAY OPTIONS 
    1. Check the options available in the HUD option menu displayed via the instrument cluster

    Is the HUD Traffic Sign Recognition Display option available from the HUD option menu displayed via the instrument cluster?

    • Yes  : GO to E4.
    • No  : GO to E3.
  3. E3: HUD TRAFFIC SIGN RECOGNITION (TSR) DISPLAY OPTION IS NOT AVAILABLE FROM THE HUD OPTION MENU 
    1. Using the manufacturer approved diagnostic system, check the car configuration file (CCF) parameters

    Is the ruleset of CCF parameter 98 set to "fitted"?

    • Yes  : GO to E4.
    • No  : Update the ruleset with the correct values. Then, GO to E4.
  4. E4: ENABLE THE HUD TRAFFIC SIGN RECOGNITION (TSR) DISPLAY OPTION FROM THE HUD OPTIONS MENU 
    1. Enable the HUD Traffic Sign Recognition Display option from the HUD options menu via the instrument cluster

    Is the HUD Traffic Sign Recognition Display option enabled in the HUD option menu displayed via the instrument cluster?

    • Yes  : GO to E5.
    • No  : Switch on the HUD Traffic Sign Recognition Display option from the HUD options menu via the instrument cluster. Then, GO to E5.
  5. E5: CHECK FOR TRAFFIC SIGN RECOGNITION (TSR) DISPLAY ON THE INSTRUMENT CLUSTER 
    1. Check for Traffic Sign Recognition information displayed on the instrument cluster

    Is Traffic Sign Recognition information now displayed on the instrument cluster?

    • Yes  : If the HUD Traffic Sign Recognition display is now also operational, no further action is required. If the HUD Traffic Sign Recognition display is still unavailable, check the operation of the HUD system, GO to Pinpoint Test C .
    • No  : Switch on the instrument cluster Traffic Sign Recognition Display option from the instrument cluster options menu. Then, GO to E6.
  6. E6: RECHECK FOR TRAFFIC SIGN RECOGNITION (TSR) DISPLAY ON THE INSTRUMENT CLUSTER AND HUD DISPLAY 
    1. Check for Traffic Sign Recognition information displayed on the instrument cluster

    Is Traffic Sign Recognition information now displayed on the instrument cluster?

    • Yes  : If the HUD Traffic Sign Recognition display is now also operational, no further action is required. If the HUD Traffic Sign Recognition display is still unavailable, check the operation of the HUD system, GO to Pinpoint Test C .
    • No  : Check the instrument cluster for related DTCs and refer to Traffic Sign Recognition system diagnostic processes
scientia non olet · About LEMON Manuals