LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Information & Message Center -- XE (X760)) >> Information And Message Center >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test D: HUD Navigation Display Checks

Pinpoint Test D: HUD Navigation Display Checks

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. D1: CHECK IF AN APPROPRIATE NAVIGATION SYSTEM IS FITTED TO THE VEHICLE 
    1. Confirm if the vehicle is fitted with a manufacturer-approved navigation system

    Is the vehicle fitted with a manufacturer-approved navigation system?

    • Yes  : GO to D2.
    • No  : HUD navigation display will not operate
  2. D2: CHECK THE CAR CONFIGURATION FILE (CCF) SETTINGS 
    1. Using the manufacturer approved diagnostic system, check the car configuration file (CCF) parameters

    Is the ruleset of CCF parameter 127 set to "fitted"?

    • Yes  : GO to D3.
    • No  : Set the ruleset of CCF parameter 127 to "fitted". Then, GO to D3.
  3. D3: CHECK THE HUD MENU (VIA THE INSTRUMENT CLUSTER) FOR HUD NAV DISPLAY OPTIONS 
    1. Check the options available in the HUD option menu displayed via the instrument cluster

    Is the HUD Navigation Display option available from the HUD option menu displayed via the instrument cluster?

    • Yes  : GO to D5.
    • No  : GO to D4.
  4. D4: HUD NAVIGATION DISPLAY OPTION IS NOT AVAILABLE FROM THE HUD OPTION MENU 
    1. Using the manufacturer approved diagnostic system, check the car configuration file (CCF) parameters

    Is the ruleset of CCF parameter 516 set to "fitted"?

    • Yes  : Check the instrument cluster for related DTCs and refer to instrument cluster diagnostic processes
    • No  : Check regional availability of HUD Navigation Display. If available, the correct CCF settings are required to enable the display. Check CCF settings are correct and amend as required
  5. D5: ENABLE THE HUD NAVIGATION DISPLAY OPTION FROM THE HUD OPTIONS MENU 
    1. Enable the HUD Navigation Display option from the HUD options menu via the instrument cluster

    Is the HUD Navigation Display option enabled in the HUD option menu displayed via the instrument cluster?

    • Yes  : GO to D6.
    • No  : Switch on the HUD Navigation Display option from the HUD options menu via the instrument cluster. Then, GO to D6.
  6. D6: CHECK FOR NAVIGATION DISPLAY ON THE INSTRUMENT CLUSTER AND HUD DISPLAY 
    1. Check for navigation information displayed on the instrument cluster

    Is navigation information now displayed on the instrument cluster?

    • Yes  : If the HUD navigation display is now also operational, no further action is required. If the HUD navigation display is still unavailable, check the operation of the HUD system, GO to Pinpoint Test C .
    • No  : Check the instrument cluster for related DTCs and refer to navigation system diagnostic processes
scientia non olet · About LEMON Manuals