Section 202 (Exterior Body & Paint Pre-Delivery Inspection (PDI) Standards -- XE/(760))
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Exterior Body & Paint Pre-Delivery Inspection (PDI) Standards
- Description And Operation
- Introduction (G1676681)
- Cosmetic Acceptance Standards (G1676682)
- Exterior Pre-Delivery Inspection Process (G1676688)
- Exterior Surface Zone Identification (G1821389)
- General Requirements (G2357674)
- Identification Of Exceptions (G1676687)
- Paint Exceptions And Associated Repair Procedures (G1676685)
- Fine Blistering
- Blowing
- Chipped Paint/Scratches
- CISSING
- Contamination
- Dirt/Dust On BASECOAT
- Dirt In Clear Coat
- Dirt Under BASECOAT
- Dull Finish/Abnormal Loss Of Gloss
- Etching
- Flaking/Delamination
- HALOES
- Off Shade
- Opacity/Inadequate Color Coverage
- Orange Peel
- OVERSPRAY
- Polishing Compound
- Polishing Witness Marks (Circular Fine Scratches)
- Poor Metal Finish
- Runs
- Sanding Scratches
- Shadiness/SHEARY
- Solvent Retention
- Staining/Discoloration
- Description And Operation