LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Exterior Body & Paint Pre-Delivery Inspection (PDI) Standards -- XE/(760)) >> Exterior Body & Paint Pre-Delivery Inspection (PDI) Standards >> Description And Operation >> Cosmetic Acceptance Standards (G1676682) >> A Zone - Medium To High Visibility >> Glass

A Zone - Medium To High Visibility: Glass

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Basic Defects Including Bubbles, Seeds, Stones, Top Tin, Adhesion Chips and Paint Spots 

CHARACTERISTIC PDI 
Less than or equal to 0.5mm, max of 6 per part, 150mm separation Acceptable
Greater than 0.5 mm to 1.0 mm, max of 3 per part, 150 mm separation Acceptable
Greater than 1.0 mm Not permissible

Chips/Scratches/Marks 

NOTE:
  • Heavy scratch: a scratch that can be located with a fingernail, appears frosty and is readily visible at 90cm.
  • Medium scratch: a scratch that is slightly ragged at the edge and may be sometimes located with the fingernail, but not readily visible at 90cm
  • Light scratch: a very fine scratch, not ragged, cannot be located by a fingernail and is not easily discernible at 90cm.
CHARACTERISTIC PDI 
Heavy 5.1mm to 10.0mm Not permissible
Heavy 0.5mm to 5.0mm and medium 10.1mm to 20.0mm. No more than 2 in a 205mm diameter area Acceptable
Medium 3.0mm to 10.0mm and light 20.1mm to 40.0mm. No more than 3 in a 305mm diameter area Acceptable
Light 6.0mm to 20mm. No more than 4 in a 305mm diameter area Acceptable