Seat Belt Retractor Replacement - No. 1 Rear Center (Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Center Belt Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) . Remove seat back pad and cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) or Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) .
1	Rear Seat Center Belt Assembly Cover Tip: Tilt 40 percent split forward for access.
2	Rear Seat Center Belt Retainer
3	Rear Seat Center Belt Bolt (Qty: 2) Tighten: 52 N.m (38 lb ft)
4	Rear Seat Center Belt Assembly