Front Seat Cushion Frame Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Cushion Frame & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket .
1	Front Seat Adjuster Outer Finish Cover Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Manual) or Seat Cushion Outer Trim Panel Replacement - Front Seat (Power) .
2	Front Seat Adjuster Inner Finish Cover Refer to Seat Cushion Inner Trim Panel Replacement - Front .
3	Front Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser.
4	Seat Back Frame Bolt (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
5	Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement .
6	Front Seat Cushion Frame Nut (Qty: 4) Refer to Front Seat Adjuster Replacement (Power) . Tighten: 9 N.m (80 lb in)
7	Heated Seat Module Tip: Disconnect the electrical connector.
8	Front Seat Cushion Frame Tip: If working on the passenger seat, remove the inflatable restraint passenger presence system. Refer to Inflatable Restraint Passenger Presence System Replacement - Front .