LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Seat Cushion Inner Trim Panel Replacement - Front

Seat Cushion Inner Trim Panel Replacement - Front

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Adjuster Inner Finish Cover
GM1678365Courtesy of GENERAL MOTORS CORP.
Seat Cushion Inner Trim Panel Replacement - Front

Callout Component Name
Preliminary Procedure: 
Remove the front seat. Refer to Front Seat Replacement - Bucket .
1 Front Seat Adjuster Inner Finish Cover
Tip: 
  1. Disengage the bezel around the seat belt buckle.
  2. Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover.
  3. Pull outward to release the retainers from the seat assembly.