LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Seat Heating System And Seat Cooling System) >> Repair Instructions >> Rear Seat Cushion Heater Replacement

Rear Seat Cushion Heater Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Cushion Heater Assembly And Cushion Cover
GM1696621Courtesy of GENERAL MOTORS CORP.
Rear Seat Cushion Heater Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the rear seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) .
  2. Remove the recliner handle. Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) .
  3. Remove the outer finish cover. Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) .
  4. Remove the inner finish cover. Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) .
  5. Remove the cushion lower trim cover. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT) .
1 Rear Seat Cushion Cover
  1. Disconnect the seat cushion cover j-channel from the seat cushion frame.
  2. Disconnect the electrical connector.
  3. Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.
2 Rear Seat Cushion Heater Assembly