LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket)

Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Recliner Inner Panel
GM1684823Courtesy of GENERAL MOTORS CORP.
Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket)

Callout Component Name
1 Rear Seat Recliner Inner Finish Cover Nut
TIP:  The nut is located in a recessed hole on the inboard side of the inner trim panel.
2 Rear Seat Recliner Inner Finish Cover
TIP:  Pull away from seat to disengage the integral retainers.
3 Rear Seat Recliner Inner Finish Cover Retainer Clip (Qty: 2)