Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)
| Callout | Component Name |
|---|---|
| 1 | Rear Seat Recliner Handle TIP: Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle. |
| 2 | Rear Seat Recliner Outer Finish Cover Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) . |
| 3 | Rear Seat Recliner Inner Finish Cover Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) . |
| 4 | Rear Seat Cushion Trim Panel Screws (Qty: 5)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 5 | Rear Seat Cushion Trim Panel Push In Retainer (Qty: 2) |
| 6 | Rear Seat Cushion Trim Panel |