Assist Step Rear Bracket Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Power Assist Step Rear Bracket, Nuts & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Deploy and support the power assist step. Use a grease pencil to outline the location of the power assist step rear bracket location on the power assist step. Remove the power assist rear bracket to power assist step bolts. Refer to Assist Step Replacement (Z71) or Assist Step Replacement (Power) or Assist Step Replacement (Chevrolet HP2) or Assist Step Replacement (GMC Denali XL)
1	Power Assist Step Rear Bracket Bolts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 6 N.m (53 lb in)
2	Power Assist Step Rear Bracket Nuts (Qty: 3) Tighten: 10 N.m (89 lb in)
3	Power Assist Step Rear Bracket