Assist Step Replacement (Chevrolet HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Assist Step Extension |
| 2 | Assist Step Extension Bolt Tighten: 18 N.m (13 lb ft) |
| 3 | Assist Step Assembly |
| 4 | Assist Step Assembly Bracket Bolt (Qty: 8)
NOTE:
Refer to Fastener Notice
.
Tighten: 18 N.m (13 lb ft) Tip: Secure the forward and rearward bolts first after the assist step has been installed. |
| 5 | Assist Step Bracket Body Bolt (Qty: 4) Tighten: 18 N.m (13 lb ft) |