Rear Seat Number 2 Back Cushion Cover & Pad Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Back Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) .
1	Rear Seat Hinge Finish Cover Refer to Rear Seat Number 2 Back Cushion Hinge Finish Cover Replacement (AW2) .
2	Rear Seat Head Restraint Assembly Refer to Rear Seat Number 2 Head Restraint Replacement .
3	Rear Seat Head Restraint Guide (Qty: 2) Refer to Rear Seat Number 2 Head Restraint Guide Replacement .
4	Rear Seat Shoulder Belt Bezel Refer to Rear Seat Shoulder Belt Opening Bezel Replacement (Tahoe/Yukon/Escalade Rear Seat No. 2) or Rear Seat Shoulder Belt Opening Bezel Replacement (Avalanche/Escalade EXT) .
5	Rear Seat Back #2 Cushion Cover Tip: Disconnect the seat back cushion cover j-channel from the seat cushion frame.
6	Rear Seat #2 Cushion Pad Tip: Pull the seat back cushion cover away from the seat cushion pad to disengage the retaining channel.