LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Shoulder Belt Opening Bezel Replacement (Avalanche/Escalade EXT)

Rear Seat Shoulder Belt Opening Bezel Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Shoulder Belt Opening Bezel & Screw
GM1708143Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Rear Seat Shoulder Belt Opening Bezel Screw
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Rear Seat Shoulder Belt Opening Bezel
  1. Remove the seat belt anchor bolt and disengage the seat belt anchor from the seat frame by using a flat bladed tool.
  2. Slide the bezel along the seat belt and remove with belt assembly.