LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Cushion Frame Replacement (Avalanche/Escalade EXT)

Rear Seat Cushion Frame Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Cushion Frame & Components
GM1708122Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Unlatch the rear seat cushion and fold forward.
  2. Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT)  or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) .
1 Rear Seat Cushion Cover and Pad
Refer to Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket)  or Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
2 Rear Seat Riser Front Bracket Bolt (Qty: 5)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)
3 Rear Seat Cushion Frame
scientia non olet · About LEMON Manuals