Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Remove Load Floor Stowage Compartment Cover(1)Load Floor Stowage Compartment Cover Replacement
- Remove Liftgate Sill Garnish Molding (1)Liftgate Sill Garnish Molding Replacement
- Remove Quarter Window Trim Finish Panel (3)Quarter Window Trim Finish Panel Replacement
- Remove Rear Side Door Sill Garnish Molding (1) Rear Side Door Sill Garnish Molding Replacement
- Remove Cargo Tie Down Loop (2)Cargo Tie Down Loop Replacement
- Remove Body Rear Corner Upper Garnish Molding (3)Body Rear Corner Upper Garnish Molding Replacement
- Remove Rear Compartment Floor Stowage Trim Compartment (1)Rear Compartment Floor Stowage Trim Compartment Replacement
- Remove 3rd Row Seat(4)3rd Row Seat Removal and Installation
- Use a flat-bladed plastic trim tool to release the quarter lower rear trim panel (1)from the quarter inner panel.
- Disconnect all electrical connectors.