Quarter Window Trim Finish Panel Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Quarter Window Trim Finish Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disable the SIR system. SIR Disabling and Enabling Remove the rear seat lower anchor plate bolt on the side of the trim panel being replaced. Rear Seat Belt Retractor Replacement
1	Quarter Window Trim Finish Panel Bolt Cap
2	Quarter Window Trim Finish Panel Fastener CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
3	Quarter Window Trim Finish Panel Procedure Use a flat bladed plastic trim tool. Route the seat belt through trim panel. Enable the SIR System. SIR Disabling and Enabling