LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 3.6L (LFX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Front Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Assemble the engine front cover. Refer to Engine Front Cover Assemble .
    2. Fig 1: Engine Front Cover
    GM1306469Courtesy of GENERAL MOTORS COMPANY
  2. Use the EN-46109  pins in order to install the engine front cover. Refer to Engine Front Cover Installation .
  3. Install the camshaft position actuator solenoid valves to the front cover. Refer to Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake , Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Exhaust , Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Intake , and Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Exhaust .
  4. Install the camshaft position sensors. Refer to Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust , Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake , Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust , and Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake .
  5. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation .
  6. Install the generator bracket with the generator and the belt tensioner. Refer to Generator Replacement (LFX) .
  7. Install the water outlet. Refer to Water Outlet Replacement (LFX) .
  8. Install the purge vent hose to the water outlet.
  9. Fill the cooling system. Refer to Cooling System Draining and Filling (LFX)Cooling System Draining and Filling (GE 47716) .
  10. Install the water pump pulley.
  11. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  12. Install the camshaft covers. Refer to Camshaft Cover Replacement - Left Side , and Camshaft Cover Replacement - Right Side .
  13. Install the intake manifold. Refer to Intake Manifold Replacement .
  14. Fill the cooling system. Refer to Cooling System Draining and Filling (LFX)Cooling System Draining and Filling (GE 47716) .
scientia non olet · About LEMON Manuals