Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Camshaft Position Sensor - Bank 1 (Right Side) Intake

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
1	Camshaft Position Sensor Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Sensor Procedure Disconnect the electrical connector.