High Mount Stop Lamp Replacement (Acadia)

Fig 1: High Mount Stop Lamp (Acadia)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Open the liftgate. Remove the interior liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement (TB4) , Liftgate Garnish Molding Replacement (TB5) . Remove the rear spoiler. Refer to Rear Spoiler Replacement (Enclave, Traverse) , Rear Spoiler Replacement (Acadia) .
1	High Mounted Stop Lamp Electrical Connector
2	High Mounted Stop Lamp Screws (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
3	High Mount Stop Lamp Assembly Procedure Remove the high mounted stop lamp from the bottom side of the rear spoiler.