Brake System - General Information -- Excursion & F250-F550 Super Duty

• Specifications
  • General Specifications
  • Torque Specifications
• Description And Operation
  • Brake System
    • Component Locations
      • Notes
      • Adjustable Pedals
      • Adjustable Pedal Operation
      • Memory Adjustable Pedal Operation (Excursion Limited Only)
      • Programming Adjustable Pedal Positions
    • Driver Seat Module
      • Notes
      • Recalling a Stored Adjustable Pedal Position
• Diagnosis And Testing
  • Brake System
    • Notes
    • Special Tool(s)
    • Material
    • Inspection and Verification
    • Road Test
    • Brake Pads
    • Brake Discs
    • Brake Caliper
    • Brake Caliper Guide Pins
    • Brake Lines and Tubes
    • Non-Pressure Leaks
    • Brake Master Cylinder - Normal Conditions
    • Brake Master Cylinder - Abnormal Conditions
    • Brake Booster
    • Parking Brake
    • Adjustable Pedals With Memory Feature
    • DSM Diagnostic Trouble Code (DTC) Index
    • Symptom Charts
      • Symptom Chart
      • Symptom Chart - Adjustable Pedal Without Memory
      • Symptom Chart - Adjustable Pedal With Memory
    • Pinpoint Tests
      • Pinpoint Test A: Red Brake Warning Indicator Always On
      • Pinpoint Test B: Vibration When The Brakes Are Applied
      • Pinpoint Test C: Adjustable Brake Pedal Does Not Move
      • Pinpoint Test D: Adjustable Pedal Moves Forward Only
      • Pinpoint Test E: Adjustable Pedal Moves Rearward Only
      • Pinpoint Test F: DTCS B1987, B1988, And B1989: Pedal Forward/Rearward Motor Stalled, Forward/Rearward Switch Short To Battery
      • PINPOINT TEST G: DTCS B1990 and B1991: PEDAL FORWARD/REARWARD POTENTIOMETER FEEDBACK CIRCUIT SHORT TO BATTERY
    • Component Tests
    • Accumulator, Hydro-Boost Only
    • Check Valve - Vacuum Booster Only
    • Brake Master Cylinder
    • Compensator Port Check
• General Procedures
  • Component Bleeding
    • Special Tool(s)
    • Master Cylinder Priming - In-Vehicle or Bench
    • Four Wheel Anti-Lock Brake System (4WABS) Hydraulic Control Unit (HCU)
    • Caliper
  • Brake Disc Machining
    • Special Tool(s)
    • Material
    • Brake Disc Machining
  • Brake System Bleeding
    • Manual
    • Pressure
  • Hydraulic Leak Check