General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake Disc | |
| Front brake disc minimum thickness | 36.0 mm (1.41 inch) |
| Rear brake disc minimum thickness (F250 and F350) | 28.0 mm (1.10 inch) |
| Rear brake disc minimum thickness (F450 and F550) | 36.0 mm (1.41 inch) |
| Minimum thickness to machine front brake disc | 36.6 mm (1.44 inch) |
| Minimum thickness to machine rear brake disc (F250 and F350) | 28.6 mm (1.12 inch) |
| Minimum thickness to machine rear brake disc (F450 and F550) | 36.6 mm (1.44 inch) |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CXC-31) | ESA-M6C25-A |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2-B) | ESE-M12A4-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3 | ESE-M1C171-A |
| Brake Parts Cleaner PM-4 | - |