LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body - Interior & Exterior - 500 - Electric) >> Interior >> Panel, Quarter Trim, Rear >> Removal

Panel, Quarter Trim, Rear: Removal

WARNING: This page is about a different variant/trim than selected.
GC0153226Courtesy of CHRYSLER GROUP, LLC
NOTE:

Base model shown in the illustration, other models typical unless noted.

  1. Remove the cowl trim panel. Refer to PANEL, COWL TRIM, SIDE, REMOVAL .
  2. Remove the B-pillar trim panel. Refer to PANEL, B-PILLAR TRIM, REMOVAL .
  3. Remove the C-pillar trim panel. Refer to PANEL, C-PILLAR TRIM, REMOVAL .
  4. Remove the liftgate scuff plate.
  5. Remove the cargo cover.
  6. Remove the seat belt anchor cover (2).
  7. Remove the rear quarter trim retaining screws (3).
  8. If equipped, detach the cargo lamp from the quarter trim panel (1).
  9. Using trim stick (special tool #C-4755, Trim Stick) or equivalent, disengage the trim panel retaining tabs.
  10. Remove the quarter trim panel (1).