LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body - Interior & Exterior - 500 - Electric) >> Interior >> Panel, B-Pillar Trim >> Removal

Panel, B-Pillar Trim: Removal

WARNING: This page is about a different variant/trim than selected.
GC0153223Courtesy of CHRYSLER GROUP, LLC
  1. Remove the seat belt anchor at the rear seat. Refer to RETRACTOR, SEAT BELT, REMOVAL .
  2. Using trim stick (special tool #C-4755, Trim Stick) or equivalent, disengage the B-pillar trim panel retaining tabs/clips located at the bottom and upper rear areas.
  3. Pull downward on the B-pillar trim panel.
  4. Remove the B-pillar trim panel (1) and feed the seat belt through the opening.