Quarter Trim Panel: Removal
- Open rear door.
- Open liftgate.
- Remove rear door sill scuff plate. (Refer to BODY/INTERIOR/REAR DOOR SILL SCUFF PLATE - REMOVAL) .
- Remove liftgate sill scuff plate. (Refer to BODY/INTERIOR/LIFTGATE SILL SCUFF PLATE - REMOVAL)
- Fold the first row seat back down and roll seat forward.
- Fold second row seat back down.
- Remove rear floor storage bin. (Refer to BODY/INTERIOR/REAR FLOOR STOWAGE BIN - REMOVAL) .
- Remove second row seat from vehicle to access quarter trim panel. (Refer to BODY/SEATS/SEAT - REMOVAL) .
- Remove C-pillar lower seat belt anchor and D-pillar lower seat belt anchor. (Refer to ELECTRICAL/RESTRAINTS/SEAT BELT & RETRACTOR - REMOVAL) .
- Using a trim stick C-4755 or equivalent, disengage the locking tabs and remove quarter trim panel bolster cover (speaker grille). (Refer to ELECTRICAL/AUDIO/SPEAKER - REMOVAL) .
- Remove screw attaching tie down ring. See Fig 1.
- Using a trim stick C-4755 or equivalent, disengage the locking tabs attaching quarter trim panel body side panel.
- Pull quarter trim panel free enough to reach behind trim panel to disconnect power outlet connector and speaker connector.
- Remove quarter trim panel from vehicle.
| 1 - BODY SIDE |
| 2 - LOCATION PINS |
| 3 - QUARTER TRIM PANEL |
| 4 - POWER OUTLET WIRE CONNECTOR |
| 5 - POWER OUTLET MOUNT AND CAP |
| 6 - POWER OUTLET BASE |
| 7 - C-PILLAR LOWER |
| 8 - ATTACHING SCREW |
| 9 - GROMMET |
| 10 - TIE DOWN RING AND SCREW |