LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Hydraulic Brake System) >> Repair Instructions >> Power Brake Booster Vacuum Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. - Radiator Surge Tank Replacement (LTG) , or Radiator Surge Tank Replacement (LKN) , or Radiator Surge Tank Replacement (LFV)
  2. GM4238154Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Vacuum Pipe Fitting (1) @Power Brake Booster Vacuum Sensor - Disconnect

  3. Power Brake Booster Vacuum SensorElectrical Connector - Disconnect
  4. GM4238171Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Vacuum Sensor (1) - Remove

scientia non olet · About LEMON Manuals