LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Replacement (LTG)

Radiator Surge Tank Replacement (LTG)

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4196451Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static) 
  2. Heater Outlet Hose @ Radiator Surge TankRemove - Heater Outlet Hose Replacement (LTG)
  3. Engine Coolant Air Bleed Hose @ Radiator Surge TankRemove - Engine Coolant Air Bleed Hose Replacement (LTG) , or Engine Coolant Air Bleed Hose Replacement (LTG Engine Coolant Air Bleed Pipe to Radiator Surge Tank) 
1 Radiator Surge Tank Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Radiator Surge Tank

Procedure

  1. Fill the cooling system to the proper level. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static) 
  2. Start the engine and check for coolant leaks.