Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Brake Pipe - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Pipe Fitting (1) @Brake Hose - Install and tighten 18 N.m (13 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Clip (1) @Side Rail - Secure
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Clip (1) - Secure
Courtesy of GENERAL MOTORS COMPANY

Left Front Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb ft)
Radiator Surge Tank Replacement (LTG) , or Radiator Surge Tank Replacement (LKN) , or Radiator Surge Tank Replacement (LFV) - Install
Bleed the brake system. Hydraulic Brake System Bleeding (Pressure) , or Hydraulic Brake System Bleeding (Manual)