Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Brake Fluid Irritant Warning

CAUTION:

Brake Fluid Effects on Paint and Electrical Components Caution

Place the ignition switch in the OFF position.
Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. - Radiator Surge Tank Replacement (LTG) , or Radiator Surge Tank Replacement (LKN) , or Radiator Surge Tank Replacement (LFV)
Courtesy of GENERAL MOTORS COMPANY

Clip (1) - Release
Courtesy of GENERAL MOTORS COMPANY

Clip (1) - Release
Courtesy of GENERAL MOTORS COMPANY

Master Cylinder Secondary Brake Pipe Fitting (1) - Disconnect
Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
Courtesy of GENERAL MOTORS COMPANY

Master Cylinder Primary Brake Pipe Fitting (1) - Disconnect
Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Secondary Pipe Fitting (1) - Disconnect
Plug the brake pressure modulator valve (BPMV) inlet port to prevent brake fluid loss and contamination.
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Primary Pipe Fitting (1) - Disconnect
Plug the BPMV inlet port to prevent brake fluid loss and contamination.
Remove the brake pressure modulator valve pipe assembly.