LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Hydraulic Brake System) >> Repair Instructions >> Brake Master Cylinder Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Brake Master Cylinder Hose - Install
  2. GM4318396Courtesy of GENERAL MOTORS COMPANY

    Brake Master Cylinder Hose Brake Pipe Fitting (1) - Install and tighten 32 N.m (24 lb ft)

  3. GM4320392Courtesy of GENERAL MOTORS COMPANY

    Brake Master Cylinder Hose Quick Connect Fitting (1) - Connect

  4. Reposition and install the radiator surge tank. - Radiator Surge Tank Replacement (LTG) , or Radiator Surge Tank Replacement (LKN) , or Radiator Surge Tank Replacement (LFV)
  5. Bleed the hydraulic brake system. - Hydraulic Brake System Bleeding (Pressure) , or Hydraulic Brake System Bleeding (Manual)